

Petrarra cuts, calibrates and fills travertine from its own benches in Ballık, Denizli, and ships tile, slab and fabricated stone to importers across Europe, Russia and the Gulf.

Petrarra works two benches in the Ballık district outside Denizli — the same basin that made Turkish travertine the reference material it is — and processes the block in its own plant rather than selling it on. That single fact changes what we can promise: colour continuity across a 900 m² order, a repeat order from the same bench two seasons later, and an honest answer when a bench turns and the material stops matching the sample.
The plant runs a gang saw for slab, a bridge line for calibrated tile, filling and honing lines, and a tumbling drum for the antiqued range. Everything is measured after calibration, not before: thickness on a fixed jig, length and width against a master, and a wet check on filled surfaces so a hole that will open in year two opens on our floor instead of the buyer's.
A stone order is bought on colour and delivered on trust, and both break the moment the supplier does not quarry its own block.
Two benches in Ballık. We hold the block number and we answer for it.
Our in-house tolerance against the ± 1.5 mm class of EN 12057.
Tested to EN 12371; the exterior range ships unfilled by default.
Bookmatched pairs stay together. We do not break a sequence to fill a container.
Declaration of Performance referenced by block number, issued with the quotation.
If a date is not one we can hold, we say so before the order, not after.
The saw runs parallel to the sediment bedding and the face opens into the cloudy, flowered pattern. It hides jointing well and is what a hotel lobby usually buys.
Turn the block ninety degrees and the same stone comes out as straight, continuous banding — striato. Architects specify it because it lines up across a wall.
Consecutive slabs off the gang saw are mirror images. Numbered and kept together they open like a book; split apart they are just two slabs that nearly match.
Resin-filled surfaces belong indoors. On an exposed terrace the honest answer is unfilled and tumbled, because water that cannot leave the pore splits a tile at the first frost.
Henüz ürün eklenmemiş
Values are from the current production run on Ivory and Classic, tested to the European methods named alongside.
The wire saw opens the bench; every block is numbered and the bench and level are recorded.
The wire saw opens the bench; every block is numbered and the bench and level are recorded.
The block is sawn vein or cross cut; consecutive slabs are kept together with their sequence numbers.
The block is sawn vein or cross cut; consecutive slabs are kept together with their sequence numbers.
Filled with a colour-matched resin-cement blend, then honed, with a wet check on every filled surface.
Filled with a colour-matched resin-cement blend, then honed, with a wet check on every filled surface.
Thickness on a fixed jig, length and width against a master. Everything measured after calibration, not before.
Thickness on a fixed jig, length and width against a master. Everything measured after calibration, not before.
ISPM-15 crates and A-frames; block number on the frame, stow plan issued with the quotation.
ISPM-15 crates and A-frames; block number on the frame, stow plan issued with the quotation.
Send the formats, the square metres and the port. We answer with price, stow plan and lead time.

Send the formats, the finish, the square metres and the discharge port. We answer with price, stow plan and lead time.
E-posta
sales@petrarra.comTelefon
+90 216 606 21 86Adres
Sanayi Mah., Teknopark Bulvari No: 1/4C, Ic kapi 112, Pendik / Istanbul